Cisco Nexus 5600 Series - Page 33

Show Commands
show forwarding multicast route
MCR-29
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show forwarding multicast route
To display information about the IPv4 Forwarding Information Base (FIB) multicast routes, use the
show forwarding multicast route command.
show forwarding [vrf {vrf-name | all}] [ip | ipv4] multicast route {[group {group-addr
[group-mask] | group-prefix} | source {source-addr [source-mask] | source-prefix} | module
num | vrf {vrf-name | all}] | summary [module num | vrf {vrf-name | all}]}
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
vrf (Optional) Displays information for a specified virtual routing and forwarding (VRF)
instance.
vrf-name VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
all Displays information for all VRFs.
ip (Optional) Specifies IPv4.
ipv4 (Optional) Specifies IPv4.
group (Optional) Specifies an IPv4 multicast group address.
group-addr IPv4 multicast group address.
group-mask (Optional) IPv4 multicast group address mask.
group-prefix (Optional) IPv4 multicast group prefix.
source (Optional) Specifies an IPv4 multicast source address.
source-addr IPv4 multicast source address.
source-mask IPv4 multicast source address mask.
source-prefix IPv4 multicast source prefix.
module num (Optional) Specifies the module number.
summary Displays route counts.
Release Modification
5.0(3)N1(1) This command was introduced.