Cisco Nexus 5600 Series - Page 34

Show Commands
show forwarding multicast route
MCR-30
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Usage Guidelines This command does not require a license.
Examples This example shows how to display information about the IPv4 multicast FIB routes:
switch# show forwarding multicast route
IPv4 Multicast Routing table table-id:1
Total number of groups: 1
Legend:
C = Control Route
D = Drop Route
G = Local Group (directly connected receivers)
O = Drop on RPF failure
P = Punt to Supervisor
W = Wildcard
d = OTV Decap route
(*, 230.0.0.0/32), RPF Interface: NULL, flags: DG
Received Packets: 0 Bytes: 0
Number of Outgoing Interfaces: 1
Outgoing Interface List Index: 1
Ethernet1/5 Outgoing Packets:0 Bytes:0
switch#
This example shows how to display the summary information about the IPv4 multicast FIB routes:
switch# show forwarding multicast route summary
IPv4 Multicast Routing Table for Context "default"
Total number of routes: 1
Total number of (*,G) routes: 1
Total number of (S,G) routes: 0
Total number of (*,G-prefix) routes: 0
Group count: 1
Prefix insert fail count: 9
switch#
Related Commands Command Description
clear ip mroute Clears the multicast routing table.