355
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter I Commands
ip pim send-rp-discovery
This example shows how to remove an Auto-RP mapping agent:
switch(config)# no ip pim send-rp-discovery ethernet 2/1
Related Commands Command Description
show ip pim rp Displays information about PIM RPs.
ip pim auto-rp
mapping-agent
Configures a router as an Auto-RP mapping agent.
ip pim border Configures a router to be on the edge of a PIM domain.
To Next Page
Loading...
