359
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter I Commands
ip pim spt-threshold infinity
Examples This example shows how to create the PIM (*, G) state only for the group prefixes defined in
my_group_map:
switch(config)# ip pim spt-threshold infinity group-list my_group_map
This example shows how to remove the creation of the (*, G) state only:
switch(config)# no ip pim spt-threshold infinity
Related Commands Command Description
show ip pim rp Displays information about PIM RPs.
To Next Page
Loading...
