Cisco Nexus 5600 Series - Page 50

Show Commands
show ip igmp snooping querier
MCR-46
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show ip igmp snooping querier
To display information about IGMP snooping queriers, use the show ip igmp snooping querier
command.
show ip igmp snooping querier [vlan vlan-id]
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display information about IGMP snooping queriers:
switch(config)# show ip igmp snooping querier
vlan vlan-id (Optional) Specifies a VLAN. The range is from 1 to 3967 and 4048 to 4093.
Release Modification
5.0(3)N1(1) This command was introduced.