Cisco Nexus 5600 Series - Page 72

Show Commands
show ip pim df
MCR-68
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show ip pim df
To display information about the designated forwarders (DFs) for IPv4 Protocol Independent Multicast
(PIM), use the show ip pim df command.
show ip pim df [rp-or-group] [vrf {vrf-name | all}]
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command requires the LAN Base Services license.
Examples This example shows how to display information about PIM DFs:
switch(config)# show ip pim df
rp-or-group (Optional) RP or group address.
vrf (Optional) Applies to a virtual routing and forwarding (VRF) instance.
vrf-name VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
all Specifies all VRFs.
Release Modification
5.0(3)N1(1) This command was introduced.