Cisco Nexus 5600 Series - Page 73

Show Commands
show ip pim event-history
MCR-69
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show ip pim event-history
To display information in the IPv4 Protocol Independent Multicast (PIM) event history buffers, use the
show ip pim event-history command.
show ip pim event-history {errors | msgs | statistics}
Syntax Description
Command Default None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display information in the IPv4 PIM msgs event history buffer:
switch(config)# show ip pim event-history msgs
Msg events for PIM Process
1) Event:E_DEBUG, length:38, at 165671 usecs after Sat Apr 12 08:35:02 2008
[100] : nvdb: transient thread created
2) Event:E_DEBUG, length:38, at 165018 usecs after Sat Apr 12 08:35:02 2008
[100] : nvdb: create transcient thread
3) Event:E_DEBUG, length:79, at 165014 usecs after Sat Apr 12 08:35:02 2008
[100] : comp-mts-rx opc - from sap 3061 cmd pim_show_internal_event_hist_com
mand
4) Event:E_DEBUG, length:35, at 63168 usecs after Sat Apr 12 08:34:25 2008
[100] : nvdb: terminate transaction
5) Event:E_DEBUG, length:46, at 62809 usecs after Sat Apr 12 08:34:25 2008
[100] : nvdb: pim_show_df_command returned 0x0
errors Displays events of type error.
msgs Displays events of type msg.
statistics Displays events of type statistics.
Release Modification
5.0(3)N1(1) This command was introduced.