Cisco Nexus 5600 Series - Page 74

Show Commands
show ip pim event-history
MCR-70
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
6) Event:E_DEBUG, length:38, at 62676 usecs after Sat Apr 12 08:34:25 2008
[100] : nvdb: transient thread created
7) Event:E_DEBUG, length:38, at 61971 usecs after Sat Apr 12 08:34:25 2008
[100] : nvdb: create transcient thread
8) Event:E_DEBUG, length:62, at 61966 usecs after Sat Apr 12 08:34:25 2008
[100] : comp-mts-rx opc - from sap 3055 cmd pim_show_df_command
9) Event:E_DEBUG, length:50, at 771336 usecs after Sat Apr 12 06:14:41 2008
[100] : nvdb: _cli_send_my_if_command returned 0x0
10) Event:E_DEBUG, length:63, at 771105 usecs after Sat Apr 12 06:14:41 2008
[100] : comp-mts-rx opc - from sap 0 cmd _cli_send_my_if_command
<--Output truncated-->
switch(config)#
Related Commands Command Description
clear ip pim
event-history
Clears the contents of the PIM event history buffers.
ip pim event-history Configures the size of PIM event history buffers.