Figure 3:
Screw holes for front mounting brackets (both
left & right sides)
5Beacon (BCN), Status (STS), and Environment
(ENV) LEDs
1
Grounding pad61-/10-Gigabit SFP+ ports (2)2
40-/100-Gigabit QSFP28 ports (ports 1 to 48 in
4 rows of 12 ports)
3
Green colored 100-Gigabit QSFP28 ports
supporting MACsec (when software support is
available) (ports 49 to 64 in 4 rows of 4 ports)
4
To determine which transceivers, adapters, and cables are supported by this switch, see the Cisco Transceiver
Modules Compatibility Information document.
The following figure shows the switch features on the power supply side of the chassis.
Cisco Nexus 9364C-H1 NX-OS Mode Switch Hardware Installation Guide
4
Overview
Overview
To Next Page
Loading...
