Need help?Do you have a question about the Cisco Nexus 9364C-H1 and is the answer not in the manual?
General| Product Series | Nexus 9000 |
|---|---|
| Model | Nexus 9364C-H1 |
| Form Factor | 1RU |
| Product Type | Switch |
| Total Ports | 64 |
| Switching Capacity | 12.8 Tbps |
| Operating System | Cisco NX-OS |
| Memory | 16 GB |
| Flash Memory | 16 GB |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Storage Temperature | -40 to 158°F (-40 to 70°C) |
| Cooling | Front-to-back airflow |
| Power Supply | Dual AC or DC power supplies |
| Humidity | 5% to 95% (non-condensing) |
General introduction to the Cisco Nexus 9364C-H1 switch and its features.
Specifies the operating temperature range for the switch.
Details humidity control requirements for optimal switch operation.
Outlines altitude considerations for switch installation.
Discusses the impact of dust and particles on switch performance.
Provides guidelines to reduce EMI/RFI interference for switch operation.
Covers shock and vibration testing for the switch.
Explains the importance and methods of grounding the switch chassis.
Outlines considerations for power supply planning and redundancy.
Details airflow direction and cooling requirements for the switch.
Specifies requirements for installing the switch in racks and cabinets.
Describes options for installing the chassis using rack-mount kits.
Steps for installing a rack before mounting the chassis.
Procedures for unpacking and inspecting the switch.
Guidance on positioning the chassis within the rack for optimal airflow.
Instructions for installing the chassis in a four-post rack.
Detailed steps for using the specific rack-mount kit.
Instructions for properly grounding the switch chassis.
Steps for connecting power and starting the switch.
Steps to configure the switch's management interface.
Information on connecting uplink ports for network connectivity.
Guidance on connecting the switch to host servers.
Best practices for connecting ports and handling transceivers.
Procedures for maintaining transceivers and optical cables.
Types of racks and cabinets suitable for switch installation.
General specifications for cabinets and racks.
Specific requirements for open racks.
Specific requirements for perforated cabinets.
Guidelines for managing cables within the rack.
Environmental parameters affecting switch operation.
Physical dimensions of the Cisco Nexus 9364C-H1 switch.
Weight and quantity details for the switch and its modules.
Specifications for transceivers and cables.
Power input requirements for the switch.
Detailed power specifications for various modules.
Technical specs for 1400-W AC power supplies.
Technical specs for 2000-W AC power supplies.
Technical specs for 2000-W HVAC/HVDC power supplies.
Technical specs for 2000-W DC power supplies.
Details on power cables for AC power supplies.
Power cable part numbers and descriptions for NXA-PAC-2KW.
Supported HVAC/HVDC power cables.
Lists regulatory compliance standards for the switch.
EMC immunity standards compliance.
RoHS compliance information for the product.
Description of LEDs on the switch chassis and their status indications.
Description of LEDs on uplink modules and their status.
Description of LEDs on fan modules and their status.
Description of LEDs on power supply modules and their status.
Checklist for site planning tasks before switch installation.
Worksheet to record installation contact and site details.
Worksheet to record switch and module information.
To Next Page