Cisco P-LTE-MNA User Manual

Hardware Installation Guide for the Cisco 1000 Series Integrated
Services Router
Last Modified: 2019-06-07
Last Modified: 2020-07-23
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883

Cisco P-LTE-MNA Specifications

General

Brand	Cisco
Model	P-LTE-MNA
Category	Network Router
Language	English

Summary

Overview of Cisco 1000 Series Integrated Services Routers

Prepare for Router Installation

Safety Recommendations

Provides critical safety instructions and warnings for installing Cisco 1000 Series ISRs.

Safety With Electricity

Details safety precautions related to electrical hazards during installation and operation.

ESD Prevention and Site Requirements

Covers electrostatic discharge prevention and general site requirements for optimal router operation.

Install and Connect the Router

Unpack and Setup

Guides on unpacking the router and initial setup options like desktop, rack, or wall.

Mounting Options

Chassis Grounding

Explains the procedure for connecting the router chassis to earth ground for safety.

Power and Console Connections

Details connecting the power cable and establishing a console connection to the router.

Network Interface Connections

Covers connecting WAN/LAN interfaces, ports, cabling, and connection procedures.

Configure Router at Startup

ROM Monitor Overview

ROM Monitor Introduction

ROMMON Variables and Configuration Register

Explains ROMMON environment variables and the configuration register settings.

Accessing ROMMON Mode

Supplier Declaration of Conformity

FCC and Radio Compliance

Details FCC compliance, RF exposure, and radio regulations for Wi-Fi and LTE.