EasyManua.ls Logo

Cisco PAP2T - Specifications; Data Networking Specifications; Voice Gateway and Algorithms; Fax Capability

Cisco PAP2T
5 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Data Sheet
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 5
Specifications
Table 1 contains the specifications and package contents for the Cisco PAP2T Internet Phone
Adapter with 2 VoIP Ports.
Table 1. Specifications for the Cisco PAP2T Internet Phone Adapter with 2 VoIP Ports
Specifications
*Note: Many specifications are programmable within a defined range or list of options. Please see the PAP2T
Administration Guide for details. The configuration profile is uploaded to the PAP2T at the time of provisioning.
Data networking
MAC address (IEEE 802.3)
IPv4 (RFC 791) upgradeable to v6 (RFC 1883)
Address Resolution Protocol (ARP)
DNS-A record (RFC 1706), SRV record (RFC 2782)
Dynamic Host Configuration Protocol (DHCP) client (RFC 2131)
Internet Control Message Protocol (ICMP) (RFC 792)
TCP (RFC 793)
User Datagram Protocol (UDP) (RFC 768)
Real Time Protocol (RTP) (RFC 1889) (RFC 1890)
Real Time Control Protocol (RTCP) (RFC 1889)
Differentiated Services (DiffServ) (RFC 2475), type of service (ToS) (RFC 791/1349)
Simple Network Time Protocol (SNTP) (RFC 2030)
Voice gateway
Session Initiation Protocol (SIP) v2 (RFC 3261, 3262, 3263, 3264)
SIP proxy redundancy - dynamic via DNS SRV, A records deregistration with primary
SIP proxy server
SIP support in network address translation (NAT) networks (including Serial Tunnel
[STUN])
Highly secure (encrypted) calling via prestandard implementation of Secure RTP
Codec name assignment
Voice algorithms
G.711 (A-law and µ-law)
G.726 (16/24/32/40 kbps)
G.729 A
G.723.1 (6.3 kbps, 5.3 kbps)
Dynamic payload
Adjustable audio frames per packet
Fax capability
Fax tone detection pass-through
Fax pass-though - using G.711
Dual-tone multifrequency (DTMF): in-band and out-of-band (RFC 2833) (SIP info)
Flexible dial plan support with interdigit timers and IP dialing
Call progress tone generation
Jitter buffer - adaptive
Frame loss concealment
Full duplex audio
Echo cancellation (G.165/G.168)
Voice activity detection (VAD) with silence suppression
Attenuation/gain adjustments
Flash hook timer
Message waiting indicator (MWI) tones
Visual messaging waiting indicator (VMWI) via frequency shift keying (FSK)
Polarity control
Hook flash event signaling
Caller ID generation (name and number) - Bellcore, DTMF, European
Telecommunications Standards Institute (ETSI)
Music on hold client
Streaming audio server - up to 10 sessions

Related product manuals