Cisco PenTeleData 8800 Series Firmware Migration Master Guide

© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Internal Information. Page 12 of 30
15. If successful, you should see the following message on your phone screen.
16. The phone will reboot and the screen will be blank.
MPP conversion is now complete! You can validate the success on the phone by navigating in your web browser to Info -> Status. Under
Product Information, the “Software Version” will indicate the phone load and this should NOT be the transitional load.

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English