EasyManuals Logo

Cisco PenTeleData 8800 Series Firmware Migration Master Guide

Cisco PenTeleData 8800 Series
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Internal Information. Page 29 of 30
20. Press the Applications button [ ], go to Status > Reboot History. What do you see here?
21. Press the Applications button [ ], scroll to Status -> Status messages. What do you see here?
22. Select a message and click Details.
23. Press the Applications button [ ], scroll to Status -> Network status -> IPv4 status. Determine the IP address of your phone.
24. Validate the user password you entered by typing this into your web browser: http://<IP_address_of_Phone>
25. For this step you will configure Do Not Disturb on your phone..
Push the DND softkey to set to DND.
Validate DND status at the top of the screen
Press Clr DND to turn DND off.
NOTE: Here is a difference between MPP firmware and CUCM firmware for your reference. DND on CUCM requires that the CUCM admin
adds DND to the softkey template. In other words, the DND softkey is disabled by default on CUCM.

Other manuals for Cisco PenTeleData 8800 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco PenTeleData 8800 Series and is the answer not in the manual?

Cisco PenTeleData 8800 Series Specifications

General IconGeneral
BrandCisco
ModelPenTeleData 8800 Series
CategoryIP Phone
LanguageEnglish

Related product manuals