Cisco PIX 501 Hardware Installation Guide

7-14
Cisco PIX Firewall Hardware Installation Guide
78-15170-01
Chapter 7 PIX 535
Installing a Circuit Board in the PIX 535
2 GE + 2FE + 1 4-port FE 4 GE + 2 FE + 1 4-port FE + 1 VPN Accelerator
2 GE + 2FE + 1 4-port FE + 1 VPN
Accelerator
3 GE + 6 FE
1 GE + 3 FE + 1 4-port FE 3 GE + 5 FE + 1 VPN Accelerator
1 GE + 3 FE + 1 4-port FE + 1 VPN
Accelerator
3 GE + 1 4-port FE + 3 FE
8 FE 3 GE + 5 FE + 1 VPN Accelerator
8 FE + 1 VPN Accelerator 3 GE + 3 FE + 1 4-port FE
4 FE + 1 4-port 3 GE + 3 FE+ 1 4-port FE + 1 VPN Accelerator
4 FE + 1 4-port + 1 VPN Accelerator 2 GE + 2 4-port FE
2 4-port + 1 VPN Accelerator 2 GE + 2 4-port FE + 1 VPN Accelerator
- 2 GE + 4 FE +1 4-port FE
- 2 GE + 4 FE + 1 4-port FE + + 1 VPN Accelerator
-2 GE + 7 FE
- 2 GE + 6 FE + 1 VPN Accelerator
-9 FE
- 8 FE + 1 VPN Accelerator
- 2 4-port FE + 2 FE
- 2 4-port FE + 2 FE + 1 VPN Accelerator
- 1 4-port FE card + 6 FE
- 1 4-port FE card + 6 FE + 1 VPN Accelerator
Table 7-4 PIX 535 Interface Options (continued)
Restricted Interface Options Unrestricted Interface Options

Cisco PIX 501 Specifications

General

VPN Throughput	3 Mbps
Maximum VPN Peers	10
Firewall Type	Stateful
Power Supply	12V DC
Interfaces	4 x 10BASE-T Ethernet