EasyManuals Logo

Cisco RV345 User Manual

Cisco RV345
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Cisco RV345/RV345P Router Quick Start Guide 9
Possible Causes and Resolutions
Bad Ethernet connection:
Check the LEDs for the proper indications. Check the connectors of the
Ethernet cable to ensure that they are firmly plugged into the device
and your computer.
Wrong or conflicting IP address:
Verify that you are using the correct IP address of the device.
Verify that no other device is using the same IP address as this device.
No IP route:
If the router and your computer are in different IP subnetworks, remote
access must be enabled. You need at least one router on the network
to route the packets between the two subnetworks.
Unusually long access time:
Adding new connections may take 30–60 seconds for the affected
interfaces and LAN to become operational.

Other manuals for Cisco RV345

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV345 and is the answer not in the manual?

Cisco RV345 Specifications

General IconGeneral
WAN Ports2
LAN Ports16
Max VPN Tunnels50
Firewall Throughput900 Mbps
RAM512 MB
Flash Memory256 MB
Gigabit Ethernet Ports18
Firewall ProtectionYes
VPN SupportYes
WirelessNo
Device TypeRouter
EncryptionAES, 3DES
Operating Temperature0 to 40 °C
Storage Temperature-20 to 70°C (-4 to 158°F)
Humidity10% to 85% noncondensing
USB Ports2
Ports18 x RJ-45

Related product manuals