To Next Page
C
courtneywilliamsOct 25, 2025
What to do if my Cisco RV345 Network Router won't connect to the Internet?
- SStacey LangOct 25, 2025
If your Cisco Network Router is having trouble connecting to the Internet, there are several things you can check: * Make sure your web browser is not in offline mode. * Review your Ethernet adapter's local area network connection settings, ensuring your PC obtains an IP address through DHCP; or configure a static IP address in the 192.168.1.x range, with the default gateway set to 192.168.1.1. * Confirm that the settings you entered in the Wizard to set up your Internet connection are correct. * Try resetting both your modem and the router by turning them off, then turning the modem back on and waiting about 2 minutes before turning the router back on. This should result in you receiving a WAN IP address. * If you have a DSL modem, contact your ISP to request that they put the ...
General
