Do you have a question about the Cisco RV160 and is the answer not in the manual?
DSL WAN | - |
---|---|
Ethernet WAN | Yes |
Throughput | 0.6 Gbit/s |
Cabling technology | 10/100/1000Base-T(X) |
Networking standards | IEEE 802.1x |
Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
Ethernet interface type | Gigabit Ethernet |
Combo SFP ports quantity | 1 |
Ethernet LAN (RJ-45) ports | 4 |
Mobile network generation | Not supported |
Security algorithms | IPSec |
VPN tunnels quantity | 10 |
Routing protocols | RIP-1, RIP-2, RIPng |
Product color | Black, Grey |
Country of origin | China |
Power source type | DC |
Storage temperature (T-T) | -20 - 70 °C |
Operating temperature (T-T) | 0 - 40 °C |
Storage relative humidity (H-H) | 5 - 90 % |
Operating relative humidity (H-H) | 10 - 85 % |
Processor cores | 2 |
Quantity per pack | 1 pc(s) |
Harmonized System (HS) code | 85176990 |
Package depth | 288.798 mm |
Package width | 249.936 mm |
Package height | 106.934 mm |
Package weight | 1224.7 g |
Depth | 199.898 mm |
---|---|
Width | 150.114 mm |
Height | 29.972 mm |
Weight | 589.95 g |
Precautions to prevent device overheating, damage, circuit overload, or instability during operation.
Instructions for placing the router on a desk or mounting it securely on a wall.
Explains the status and function of front panel LEDs for power, VPN, diagnostics, and connectivity.
Details the various ports and buttons located on the back panels of the router.
Details the USB port and Kensington lock slot on the side panel of the router.
Step-by-step guide to connect the router to the network and a computer for initial setup.
Guide to access and use the Setup Wizard for basic device configuration and internet connection setup.
Instructions on how to change the default administrator username and password for enhanced security.
Steps to diagnose and resolve connectivity issues, including checking connections and IP configurations.
Provides links to Cisco support resources, firmware downloads, partner information, and product documentation.