Need help?Do you have a question about the Cisco RVS4000 - Gigabit Security Router and is the answer not in the manual?
General| WAN Ports | 1 x 10/100/1000 Mbps |
|---|---|
| LAN Ports | 4 x 10/100/1000 Mbps |
| VPN Support | IPSec, PPTP |
| Wireless | No |
| QoS | Yes |
| Power Supply | 12V DC, 1.5A |
| Humidity | 10% to 85% non-condensing |
| Firewall | SPI Firewall |
| VPN Throughput | 30 Mbps |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
| Management | Web-based |
Explains icons used in the guide for special attention.
Lists website addresses for support and information.
Legal information regarding ownership and branding.
Explains Local Area Networks and router's role.
Details IP address types (static/dynamic) and assignment.
Explains the IPS function for network security.
Explains the necessity of VPNs for data security.
Defines VPNs and how they establish secure connections.
Describes the LEDs and indicators on the front of the router.
Details the ports and reset button on the back of the router.
Introduces the setup tab and basic configuration functions.
Displays a read-only summary of router basic information.
Configures internet connection types and settings.
Details PPPoE and PPTP connection setup.
Information on Heart Beat Signal and L2TP tunneling.
Details ISP-required settings like Host Name, Domain Name, MTU.
Configures the router's local network settings.
Configures DHCP and DMZ settings.
Clones MAC address and configures routing.
Sets router time and configures IP protocol modes.
Configures DoS protection, remote management, and other basic firewall features.
Creates Access Control Lists (ACL) to define traffic rules.
Manages internet access policies for PCs based on schedule and content.
Configures single port, range forwarding, and port triggering.
Displays a summary of configured IPSec VPN tunnels.
Creates and configures Virtual Private Network (VPN) tunnels.
Administers VPN client users and manages passthrough settings.
Manages bandwidth allocation using Rate Control or Priority.
Configures QoS Trust Mode, priorities, and DSCP values.
Manages gateway access, SNMP, and system information.
Performs network diagnostics and manages configuration backup/restore.
Upgrades the router's firmware to the latest version.
Configures IPS P2P/IM and displays IPS information.
Creates Virtual LANs (VLANs) for network segmentation.
Configures port modes, VLAN membership, and RADIUS server.
Displays port statistics, enables mirroring, and configures RSTP.
Shows gateway and local network status, IP, and DHCP information.
Steps to configure a static IP address on a PC.
Guide to testing internet connectivity using ping commands.
Solutions for accessing the router's web interface.
Troubleshooting VPN connection issues.
Steps to configure port forwarding for servers.
Procedures to reset router password and factory defaults.
Instructions for installing the QuickVPN software from CD or Internet.
Guide on how to connect, manage profiles, and use the QuickVPN client.
Steps to create a secure IPSec tunnel between router and Windows PC.
Creates IP filter lists for IPSec security rules.
Steps to configure the RVS4000 as a gateway for VPN tunnels.
Steps to configure the RV082 for gateway-to-gateway VPN tunnels.
How to access the utility and purchase/register/activate the service.
Configures website filtering and reputation settings.
Configures email filtering for spam, viruses, and inappropriate content.
Manages service license information, renewal, and seats.
Details limitations and exclusions of the product warranty.
Information on how to get warranty support and service.
Compliance statements for FCC regulations and safety precautions.
Overview of software included in Linksys products.
Terms and conditions for using Linksys software.
To Next Page
