Name: Cisco RVS4000 - Gigabit Security Router
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Configuring IPSec with a Windows 2000 or XP Computer

4-Port Gigabit Security Router with VPN

Appendix C

Filter Action Tab

Click the 12. Authentication Methods tab, and verify

that the authentication method Kerberos is selected.

Then, click Edit.

Authentication Methods Tab

Change the authentication method to 13. Use this string

to protect the key exchange (preshared key), and

enter the preshared key string, such as XYZ12345.

(This is a sample key string. Yours should be a key that

is unique but easy to remember.) Then click OK.

Preshared Key

This new Preshared key will be displayed. Click the 14.

Apply button to continue, if it appears on your screen;

otherwise, proceed to the next step.

New Preshared Key

Click the 15. Tunnel Setting tab. Click the radio button The

tunnel endpoint is specified by this IP Address, and

enter the Windows 2000/XP computer’s IP Address.

Tunnel Setting Tab

Click the 16. Connection Type tab, and select All network

connections. Then click OK or Close to finish.

Connection Type Tab

On the 17. Rules tab, click the OK or Close button to

return to the screen showing the security policies.

Rules Tab

Other manuals for Cisco RVS4000 - Gigabit Security Router

Questions and Answers:

Need help?

Do you have a question about the Cisco RVS4000 - Gigabit Security Router and is the answer not in the manual?

General