41
Using Linksys QuickVPN for Windows 2000, XP, or Vista
4-Port Gigabit Security Router with VPN
Appendix B
Appendix B:
Using Linksys QuickVPN for
Windows 2000, XP, or Vista
Overview
This appendix explains how to install and use the Linksys
QuickVPN software that can be downloaded from www.
linksys.com. QuickVPN works with computers running
Windows 2000, XP, or Vista. (Computers using other
operating systems will have to use third-party VPN software.)
For Windows Vista, QuickVPN Client version 1.2.5 or later is
required.
Before You Begin
The QuickVPN program only works with a Linksys
4-Port Gigabit Security Router with VPN that is properly
configured to accept a QuickVPN connection. Follow these
instructions to configure the Router’s VPN client settings:
Click the 1. VPN tab.
Click the 2. VPN Client Accounts tab.
Enter the username in the 3. Username field.
Enter the password in the 4. Password field, and enter it
again in the Re-enter to confirm field.
Click 5. Add/Save.
Click the 6. Active checkbox for VPN Client No. 1.
Click 7. Save Settings.
VPN Client Accounts Screen
Installing the Linksys QuickVPN Software
Installing from the CD-ROM
Insert the RVS4000 CD-ROM into your CD-ROM drive. 1.
Go to the Start menu and then click Run. In the field
provided, enter D:\VPN_Client.exe (if “D” is the letter
of your CD-ROM drive).
The License Agreement screen appears. Click 2. Yes to
accept the agreement and the appropriate files are
copied to the computer.
License Agreement
Copying Files
Finished Installing Files
Click 3. Finished to complete the installation. Proceed to
the section, “Using the Linksys QuickVPN Software”.
Downloading and Installing from the Internet
Go to 1. www.linksys.com and select Products.
Click 2. Business Solutions.
Click 3. Router/VPN Solutions.
Click 4. RVS4000.
Click 5. Linksys QuickVPN Utility in the More Information
section.
To Next Page
Loading...
Need help?
General
