To Next PageTo Next Page
Need help?Do you have a question about the Cisco RV130 and is the answer not in the manual?
General| Ethernet LAN | Yes |
|---|---|
| Cabling technology | 10/100/1000Base-T(X) |
| Networking standards | IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.3, IEEE 802.3u |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet interface type | Gigabit Ethernet |
| Dual-band | No |
| Ethernet LAN (RJ-45) ports | 4 |
| Supported network protocols | PPPoE, PPTP, L2TP, DNS, IGMP, RSTP, NAT, PAT, SIP, ALG |
| Web-based management | - |
| Security algorithms | AES |
| Product color | Black |
| Certification | FCC, CE, IC |
| Input current | 2 A |
| Output voltage | 12 V |
| Power source type | DC |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 85 % |
Weight and Dimensions| Weight | - g |
|---|
Guidance on preventing overheating, ensuring airflow, and stability for device placement.
Instructions and details for mounting the router on a wall using specific screw sizes.
Explains the status lights (Power, VPN, USB, WAN, LAN) on the front panel of the RV130 model.
Details the status lights (Power, VPN, USB, WLAN, WAN, LAN) on the front panel of the RV130W model.
Describes the RESET button, LAN (1-4) ports, WAN port, and POWER 12VDC port on the back panel.
Details the USB port and Kensington Lock Slot located on the side of the router.
Guides users through the initial device configuration using the web-based Setup Wizard and Device Manager.
Instructions for changing the default administrator username and password for enhanced security.
