Need help?Do you have a question about the Cisco RV160W and is the answer not in the manual?
General| Wireless Standard | 802.11ac Wave 2 |
|---|---|
| Concurrent VPN Tunnels | 10 |
| VPN Throughput | 100 Mbps |
| Device Type | Router |
| WAN Ports | 1 x Gigabit Ethernet |
| LAN Ports | 4 x Gigabit Ethernet |
| VPN Support | IPsec, PPTP |
| Firewall | SPI |
| Power Supply | 12V DC, 1.5A |
| USB Port | 1 x USB 3.0 |
| Dimensions | 160 x 128 x 29.4 mm (6.3 x 5.0 x 1.2 in) |
| Weight | 0.31 kg (0.68 lb) |
Instructions for placing the router on a flat surface using its rubber feet.
Details on using wall-mount slots and screws for installing the router on a wall.
Explanation of status lights (PWR, VPN, DIAG, LINK/ACT, GIGABIT) on the front panel.
Description of WIFI button, RESET button, Console Port, LAN, and WAN ports.
Details on SFP Port, POWER port, USB port, and Kensington Lock Slot.
Steps to connect via Ethernet or Wireless (SSID CiscoSB-Setup) and find the router's IP.
Procedure to change the default administrator username and password.
Using the 'ping' command to test network reachability to the device.
Troubleshooting common issues like bad Ethernet, wrong IP, or long access times.
To Next Page
