Name: Cisco RVS4000 - Gigabit Security Router
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Configuring IPSec with a Windows 2000 or XP Computer

4-Port Gigabit Security Router with VPN

Appendix C

Preshared Key

This new Preshared key will be displayed. Click the 6.

Apply button to continue, if it appears on your screen;

otherwise, proceed to the next step.

New Preshared Key

Select the 7. Tunnel Setting tab, and click The tunnel

endpoint is specified by this IP Address radio button.

Then, enter the Router’s WAN IP Address.

Tunnel Setting Tab

Select the 8. Connection Type tab, and click All network

connections. Then, click the OK or Close button to

finish this rule.

Connection Type Tab

Tunnel 2: Router->win

In the new policy’s Properties screen, make sure 9.

that win -> Router is selected and deselect the Use

Add Wizard check box. Then, click Add to create the

second IP filter.

Properties Screen

Go to the 10. IP Filter List tab, and click the filter list

Router->win.

IP Filter List Tab

Click the 11. Filter Action tab, and select the filter action

Require Security. Then, click Edit. On the Security

Methods tab, verify that the Negotiate security

option is enabled, and deselect the Accept unsecured

communication, but always respond using IPSec

check box. Select Session key Perfect Forward

Secrecy, and click OK.

Other manuals for Cisco RVS4000 - Gigabit Security Router

Questions and Answers:

Need help?

Do you have a question about the Cisco RVS4000 - Gigabit Security Router and is the answer not in the manual?

General