Cisco RV160 Router Quick Start Guide 9
If the device and your computer are in different IP subnetworks,
remote access must be enabled and you need at least one router on
the network to route the packets between the two subnetworks.
Unusually long access time:
Adding new connections may take 30–60 seconds for the affected
interfaces and LAN to become operational.
Where to Go From Here
For EU Lot 26 related test results, see www.cisco.com/go/eu-lot26-results
Support
Cisco Support
Community
https://community.cisco.com/t5/small-
business-support-community/ct-p/5541-
small-business-support
Cisco Firmware
Downloads
https://software.cisco.com/download/home
Select a link to download firmware for Cisco
products. No login is required.
Cisco Partner Central
(Partner Login Required)
http://www.cisco.com/c/en/us/
partners.html
Product Documentation
Cisco RV160 https://www.cisco.com/c/en/us/support/
routers/rv160-vpn-router/model.html