1050 W V2 DC Power Supply
This section lists the specifications for 1050 W V2 DC power supply.
SpecificationParameter
Molex 42820Input Connector
-48Input Voltage Range (V rms)
-40 to -72Maximum Allowable Input Voltage Range (V rms)
NAFrequency Range (Hz)
NAMaximum Allowable Frequency Range (Hz)
1050Maximum Rated Output (W)
36Maximum Rated Standby Output (W)
-48Nominal Input Voltage (V rms)
24Nominal Input Current (A rms)
1154Maximum Input at Nominal Input Voltage (W)
1154Maximum Input at Nominal Input Voltage (VA)
91Maximum Rated Efficiency (%)
Minimum rating required to achieve 80PLUS platinum
certification.
NAMaximum Rated Power Factor
Minimum rating required to achieve 80PLUS platinum
certification.
15Maximum Inrush Current (peak A)
0.2Maximum Inrush Current (ms)
5Maximum Ride-Through Time
This is the time output voltage remains within
regulation limits at 100% load, during input voltage
dropout.
1050 W AC Power Supply
This section lists the specifications for each 1050 W AC power supply.
SpecificationParameter
IEC320 C14Input Connector
Cisco Secure Network Server 3700 Series Appliance Hardware Installation Guide
33
Server Specifications
1050 W V2 DC Power Supply