Configuring Discovery
Configuring LLDP
Cisco Small Business 300 Series Managed Switch Administration Guide 78
8
• VLAN Type—VLAN type for which the network policy is defined. The
possible field values are:
- Tagged—Indicates the network policy is defined for tagged VLANs.
- Untagged—Indicates the network policy is defined for untagged VLANs.
• User Priority—Network policy user priority.
• DSCP—Network policy DSCP.
Displaying LLDP Neighbors Information
The
LLDP Neighbors Information Page
displays information that was received
using the LLDP protocol from neighboring devices.
After timeout (based on the value received from the neighbor Time To Live TLV
during which no LLDP PDU was received from a neighbor), the information is
deleted.
To view the LLDP neighbors information:
STEP 1 Click Administration > Discovery - LLDP > Neighbors Information. The
LLDP
Neighbors Information Page
opens.
This page displays the following fields:
• Local Port—Number of the local port to which the neighbor is connected.
• Chassis ID Subtype—Type of chassis ID (for example, MAC address).
• Chassis ID—Identifier of the 802 LAN neighboring device's chassis.
• Port ID Subtype—Type of the port identifier that is shown.
• Port ID—Identifier of port.
• System Name—Published name of the switch.
• Time to Live—Time interval (in seconds) after which the information for this
neighbor is deleted.
STEP 2 Select a local port, and click Details. The
Neighbors Information Page
opens.
To Next Page
Loading...
