10
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x 172
Smartport
This document describes the Smartports feature.
It contains the following topics:
•Overview
• How the Smartport Feature Works
• Auto Smartport
• Error Handling
• Default Configuration
• Relationships with Other Features
• Common Smartport Tasks
• Configuring Smartport Using The Web-based Interface
• Built-in Smartport Macros
Overview
The Smartport feature provides a convenient way to save and share common configurations.
By applying the same Smartport macro to multiple interfaces, the interfaces share a common
set of configurations. A Smartport macro is a script of CLI (Command Line Interface)
commands.
A Smartport macro can be applied to an interface by the macro name, or by the Smartport type
associated with the macro. Applying a Smartport macro by macro name can be done only
through CLI. Refer to the CLI guide for details.
There are two ways to apply a Smartport macro by Smartport type to an interface:
• Static Smartport—You manually assign a Smartport type to an interface. The result is
the corresponding Smartport macro is applied to the interface.
To Next Page
Loading...
