EasyManuals Logo

Cisco SGE2000 Datasheet

Cisco SGE2000
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Data Sheet
© 2008-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 5
Access control ACLs - drop or rate limit based on:
Source and destination MAC-based
Source and destination IP address
Protocol
Port
VLAN
Differentiated services code point (DSCP)/IP precedence
TCP/User Datagram Protocol (UDP) source and destination ports
802.1p priority
Ethernet type
Internet Control Message Protocol (ICMP) packets
Internet Group Management Protocol (IGMP) packets
Up to 1018 rules
Availability
Link aggregation
Link aggregation using IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Up to 8 ports in up to 8 groups
Storm control Broadcast and multicast storm protection
DoS prevention DoS attack prevention
Spanning Tree
IEEE 802.1D Spanning Tree
IEEE 802.1w Rapid Spanning Tree
IEEE 802.1s Multiple Spanning Tree, Fast Linkover
IGMP snooping IGMP (versions 1 and 2) snooping limits bandwidth-intensive video traffic to only the
requestors. Supports 256 multicast groups.
Power redundancy Connection to redundant power supply unit for power redundancy
QoS
Priority levels 4 hardware queues
Scheduling Priority queuing and weighted round-robin (WRR)
Class of service
Port based
802.1p VLAN priority based
IPv4 IP precedence/ToS/DSCP based
DiffServ
Classification and re-marking ACLs
Rate limiting
Ingress policer
Egress rate control
Standards 802.3 10BASE-T Ethernet, 802.3u 100BASE-TX Fast Ethernet, 802.3ab 1000BASE-T
Gigabit Ethernet, 802.3z Gigabit Ethernet, 802.3x flow control, 802.3ad LACP, 802.1d
Spanning Tree Protocol (STP), 802.1Q/p VLAN, 802.1w Rapid STP, 802.1s Multiple STP,
802.1x port access authentication
Environmental
Dimensions
W x H x D
17.32 x 14.70 x 1.73 in.
(440 x 375 x 44 mm)
Unit weight 14.09 lb (6.39 kg)
Certification UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A
Operating temperature 32º to 104ºF (0º to 40ºC)
Storage temperature -4º to 158ºF (-20º to 70ºC)
Operating humidity 10% to 90% relative humidity, noncondensing
Storage humidity 10% to 95% relative humidity, noncondensing
Number of fans 2
Acoustic noise 55 dB max.
Power 100–240V AC, 50–60Hz, internal, universal; also equipped with redundant power supply
connector for external power supply 48V DC
Power consumption 12V at 7.5A (90W)
Package Contents

Other manuals for Cisco SGE2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SGE2000 and is the answer not in the manual?

Cisco SGE2000 Specifications

General IconGeneral
Jumbo Frame Support9KB
VLANsUp to 256
ManagementWeb-based, SNMP, CLI
StandardsIEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions440 x 44 x 257 mm
Power Supply100 to 240V AC, 50-60 Hz
Operating Temperature0°C to 40°C
Storage Temperature-20 to 70°C (-4 to 158°F)
Humidity10% to 90% non-condensing
Weight3.2 kg

Related product manuals