Cisco SE2800 - User Manual

Quick Start Guide
Cisco 2800 Series Integrated Services Routers Quick Start Guide
INCLUDING LICENSE AND WARRANTY
1 Cisco 90-Day Limited Hardware Warranty Terms
2 Overview
3 Documents, Equipment, and Tools
4 Install Chassis
5 Connect Cables
6 Power Up the Router
7 Interface Numbering
8 Perform Initial Configuration
9 Where to Go Next
10 Obtaining Documentation
11 Documentation Feedback
12 Cisco Product Security Overview
13 Obtaining Technical Assistance
14 Obtaining Additional Publications and Information

Cisco SE2800 Specifications

General

Model	SE2800
Power Supply	Internal
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-4 to 158°F (-20 to 70°C)
Humidity	10 to 90% relative humidity (noncondensing)
Compliance	FCC, CE, RoHS

Summary

Install Chassis

Installing the Router in a Rack

Guidelines and precautions for safely mounting the router in a rack.

Rack-Mounting the Router

Details on mounting routers in 19-inch and 23-inch racks, including bracket types.

Wall-Mounting the Router-Cisco 2811 Routers Only

Instructions for mounting the Cisco 2811 router on a wall.

Installing the Router on a Desktop

Precautions and steps for placing the router on a desktop.

Connect Cables

Power Connections

Connecting the Router to AC Power

Connecting the Router to DC Power

Connecting the Router to Backup Power

WAN, LAN, and Voice Connections

Power Up the Router

Checklist for Power-Up

Power-Up Procedure

Interface Numbering

Perform Initial Configuration

Initial Configuration Using Cisco Router and Security Device Manager (SDM)

Guide to configuring the router using the SDM software.

Initial Configuration Using the Setup Command Facility

Steps for configuring the router using the setup command facility.

Initial Configuration Using the Cisco CLI-Manual Configuration

Instructions for manual router configuration via the command-line interface.