To Next PageTo Next Page
Need help?Do you have a question about the Cisco N540-24Q8L2DD-SYS and is the answer not in the manual?
General| Model | N540-24Q8L2DD-SYS |
|---|---|
| Product Type | Network Router |
| Form Factor | Rack-mountable |
| RAM | 32 GB |
| Operating System | Cisco IOS XR |
| Storage | SSD |
| Power Supply | Dual AC/DC |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 5 to 95% (relative humidity) |
General safety instructions and warnings for handling equipment.
Guidelines to ensure personal safety and protect equipment during operations.
Precautions and warnings related to electrical hazards and connections.
Compliance statements and cautions related to NEBS standards.
Guidelines and considerations for power supply installation and operation.
Procedures and precautions to prevent Electrostatic Discharge damage.
General safety and handling precautions before installation.
Guidelines for preparing the site's electrical power infrastructure.
Instructions for physically placing and securing the device in a rack.
Guidance on attaching rack-mount brackets to the device.
Procedures for properly grounding the device for safety.
Steps for connecting AC power cables to the device.
Procedure to power on and verify AC power supply module.
Steps for connecting DC power cables to the device.
Procedure to power on and verify DC power supply module.
Instructions for installing and removing transceiver modules.
Safety precautions for handling transceiver modules during installation/removal.
Detailed steps for installing QSFP/QSFP-DD transceiver modules.
Detailed steps for removing QSFP/QSFP-DD transceiver modules.
Steps for performing the initial setup and configuration of the router.
Methods to verify the correct installation and configuration of the device.
Instructions for safely removing a DC power supply module.
Steps for installing a new DC power supply module.
Instructions for safely removing an AC power supply module.
Steps for installing a new AC power supply module.
