2 Cisco RV320/RV325 Gigabit Dual WAN VPN Router Quick Start Guide
Welcome
Thank you for choosing the Cisco Small Business RV320/RV325 Gigabit
Dual WAN VPN Router.
This guide describes how to physically install your Cisco RV320/RV325
and launch the web-based Device Manager.
Installing Cisco RV320/RV325
To prevent the device from overheating or being damaged:
• Ambient Temperature—Do not operate it in an area that exceeds an
ambient temperature of 104°F (40°C).
• Air Flow—Be sure that there is adequate air flow around the device. If
wall mounting the firewall, make sure the heat dissipation holes are to
the side.
• Circuit Overloading—Adding the device to the power outlet must not
overload that circuit.
• Mechanical Loading—Be sure that the device is level and stable to
avoid any hazardous conditions and that it is secure to prevent it from
sliding or shifting out of position. Do not place anything on top of the
firewall, as excessive weight might damage it.
For desktop mounting, place the device on a flat surface so that it sits on its
four rubber feet.
Wall Mounting
The router has two wall-mount slots on the bottom panel. To mount the
router on a wall, you need mounting hardware (not included). Suggested
hardware is illustrated below (not true to scale).
RV320
To Next Page
Loading...
Need help?
General
