Cisco SPA100 Series Administration Guide

Configuring the Voice Settings
Regional
Cisco SPA100Series Administration Guide 77
4
Cfwd Busy Act
Code
Forwards busy calls to the extension specified after the
activation code.
Default setting: *90
Cfwd Busy Deact
Code
Cancels call forwarding of busy calls.
Default setting: *91
Cfwd No Ans Act
Code
Forwards no-answer calls to the extension specified after
the activation code.
Default setting: *92
Cfwd No Ans
Deact Code
Cancels call forwarding of no-answer calls.
Default setting: *93
Cfwd Last Act
Code
Forwards the last inbound or outbound call to the number
that the user specifies after entering the activation code.
Default setting: *63
Cfwd Last Deact
Code
Cancels call forwarding of the last inbound or outbound
call.
Default setting: *83
Block Last Act
Code
Blocks the last inbound call.
Default setting: *60
Block Last Deact
Code
Cancels blocking of the last inbound call.
Default setting: *80
Accept Last Act
Code
Accepts the last outbound call. It lets the call ring through
when do not disturb or call forwarding of all calls are
enabled.
Default setting: *64
Accept Last Deact
Code
Cancels the code to accept the last outbound call.
Default setting: *84
CW Act Code Enables call waiting on all calls.
Default setting: *56
CW Deact Code Disables call waiting on all calls.
Default setting: *57
CW Per Call Act
Code
Enables call waiting for the next call.
Default setting: *71
Field Description

Cisco SPA100 Series Specifications

General

Brand	Cisco
Model	SPA100 Series
Category	Adapter
Language	English