Name: Cisco SPA1112
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Router Configuration Parameters

<DHCP_Server_Pool> Parameters

Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 160

<Internet_Option> Example:

<router-configuration>

...

<Internet_Option>

<Host_Name>SPA112</Host_Name>

<Domain_Name>My ISP</Domain_Name>

<DNS_Order>2</DNS_Order>

</Internet_Option>

...

</router-configuration>

<DHCP_Server_Pool> Parameters

This section describes the parameters in the <DHCP_Server_Pool> section of the

config.xml file.

NOTE In addition to the descriptions, also refer to <DHCP_Server_Pool> Example:

DHCP enabled with two DHCP reservations, page 166.

<Rule>

All parameters in the <DHCP_Server> section of the XML file are nested between

<Rule> and </Rule>.

Parameter Details

<DHCP_Server> Description: Enables or disables the DHCP server

User Interface: Network Setup > Basic Setup > Network Settings

page, DHCP Server field

Values:

0: Disabled

1: Enabled

Default: 1

Example: DHCP server enabled

<DHCP_Server>1</DHCP_Server>

Cisco SPA1112 Provisioning Guide

Other manuals for Cisco SPA1112