Provisioning Parameters
Macro Expansion Variables
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 79
5
PRVST Provisioning State, a numeric string:
-1 = explicit resync request,
0 = power-up resync,
1 = periodic resync,
2 = resync failed, retry attempt
UPGST Upgrade State, a numeric string:
1 = first upgrade attempt,
2 = upgrade failed, retry attempt
UPGERR Result message (ERR) of previous upgrade attempt,
for example http_get failed.
PRVTMR Seconds since last resync attempt.
UPGTMR Seconds since last upgrade attempt.
REGTMR1 Seconds since Line 1 lost registration with SIP server.
REGTMR2 Seconds since Line 2 lost registration with SIP server.
UPGCOND Legacy macro name, always expands to true in
firmware rev 2.0.6 and above.
SCHEME File access scheme, one of TFTP, HTTP, or HTTPS, as
obtained after parsing resync or upgrade URL.
METH Deprecated alias for SCHEME, do not use.
SERV Request target server host name, as obtained after
parsing resync or upgrade URL.
SERVIP Request target server IP address, as obtained after
parsing resync or upgrade URL, possibly following
DNS lookup.
PORT Request target UDP/TCP port, as obtained after
parsing resync or upgrade URL.
PATH Request target file path, as obtained after parsing
resync or upgrade URL.
ERR Result message of resync or upgrade attempt. Only
useful in generating result syslog messages. The value
is preserved in the UPGERR variable in the case of
upgrade attempts.
Parameter Name Description and Default Value
To Next Page
Loading...
Need help?
General