Cisco SPA112 User Manual

8 Cisco SPA100 Series Analog Telephone Adapters
Set Gateway IP Address 131 To enter the value, press
numbers on the telephone
key pad. Press the
* (star) key
to enter a decimal point.
Note: This option is available
only after you choose Static
IP as the Internet Connection
Type, through option 101.
Check MAC Address 140
Check Firmware Version 150
Check Primary DNS Server
Setting
160
Set Primary DNS Server 161 To enter the value, press
numbers on the telephone
key pad. Press the
* (star) key
to enter a decimal point.
Note: This option is available
only after you choose Static
IP as the Internet Connection
Type, through option 101.
Check Internet web server
port
170
SPA122 only: Check LAN IP
address (Ethernet port)
210
Announce Line 1 SIP
Transpor t
1910
Set Line 1 SIP Transport 1911 0: UDP
1: TCP
2: TLS
Check Line 2 SIP Transport 1920
Set Line 2 SIP Transport 1921 0: UDP
1: TCP
2: TLS
Exit IVR 3948
Allow or prevent WAN access
to the administration web
server
7932 1: Enable
0: Disable
IVR Action Menu
Option
Choices and Instructions

Cisco SPA112 Specifications

General

Supported network protocols	IPv4, IPv6, ARP, DNS, SRV, DHCP, PPPoE, ICMP, TCP, UDP, RTP, RTCP, SNTP
DHCP client	Yes
VPN support	802.1p
Security algorithms	SSL/TLS
Authentication method	SIP
Modem (RJ-11) ports	2
Ethernet LAN (RJ-45) ports	1
Voice codecs	G.711, G.726, G.729
Certification	FCC, CE, ICES, A-Tick, RoHS, UL
Fax compatibility	T.38
Output current	2 A
Output voltage	5 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	101 mm
Height	28 mm
Weight	153 g