WARNING: Use Ethernet cable only when connecting to the Ethernet port on the
camera. Do not connect a serial VISCA cable to the Ethernet port on the camera, as
this will cause severe damage to the camera.
Safety instructions
NOTE
• It is of great importance that the wall mount unit is safely installed, that the wall
is able to support the product and that the screws or mounting means used are
suitable for the wall and the weight of the product.
• This type of equipment is to be installed by the submitter’s/dealer’s qualied
installer. The installer is responsible for obtaining safety inspection of the
structural integrity of the installation by the local authority/inspection department.
• Note that the surface is hot when the camera is in operation.
To Next Page
Loading...
