Security Suite
IP Source Guard
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 153
8
The IP Source Guard Interface Table contains the following fields:
• Interface — Indicates the port’s or LAG’s number.
• Status — Indicates whether the interface is trusted or untrusted.
-
Enable
— Indicates that the interface is trusted.
-
Disable
— Indicates that the interface is untrusted. This is the default
value.
STEP 2 Enable or disable IP Source Guard on the device.
STEP 3 Enable or disable IP Source Guard on specific interfaces.
STEP 4 Click Save Settings. The IP Source Guard configuration is modified, and the
device is updated.
To Next Page
Loading...
Need help?
General
