15
D1510413 User Guide
Cisco TelePresence DX70, DX80
Produced: April 2016 for CE8.2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
Availability
Activate Do Not Disturb
Tap Do not disturb to activate the feature. Tap again to deactivate.
Tap in the upper left corner, as shown.
Your system can be set to not
respond to incoming calls. You may,
however, use it to call others as
much as you want.
Your video support team may have
set a time-out on this feature,
after which the system will return
to respond to incoming calls as
usual. Default time-out setting is 60
minutes.
About Do Not Disturb
To Next Page
Loading...
