Cisco TelePresence MX200 G2 Installation Guide

78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
Installation guide for Cisco TelePresence MX800 Dual - Floor stand
Page 4
Screws
The screw kit may contain more screws than you need,
because the same kit is shipped with all mounting options.
Tools
Allen key, 4 mm
Allen key, 2.5 mm
Torx T20
M6x90, countersunk
Tool: Allen key, 4 mm
M6x35, countersunk
Tool: Allen key, 4 mm
M6x12, countersunk
Tool: Allen key, 4 mm
M6x12, pan
Tool: Allen key, 4 mm
M4x8, pan
Tool: Allen key, 2.5 mm
PT4x10, pan
Tool: Tor x T20
EMC Class A declaration
WARNING: This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be required to take
adequate measures.
声
明
此为A级产品，在生活环境中，该产品可能会造成无线电干扰。在这种
情况下，可能需要用户对其干扰采取切实可行的措施。
WARNING: This is a class A product. In a domestic environment
this product may cause radio interference in which case the user
may be required to take adequate measures.

Cisco TelePresence MX200 G2 Specifications

General

Resolution	1920 x 1080
Network	10/100/1000 Ethernet
Product Type	Video conferencing system
Display Size	42 in
Camera	PrecisionHD 1080p Camera
Codec	Cisco TelePresence Codec
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI
Control	Cisco Touch 10
Video Standards	H.264
Connectivity	HDMI
Codec Support	H.264
Resolution (fps)	1080p30