Cisco TelePresence MX300 G2 - Resize the Selfview Pip

48
D1507602 User Guide
Cisco TelePresence MX200 G2, MX300 G2
SX80
Produced: April 2014 for TC 7.1
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.
Camera
Resize the Selfview PiP
The selfview shows what others see
from your video system. You will
normally use it to conrm that they
see what you want them to see.
The selfview appears as a PiP
(Picture-in-Picture).
From time to time you may want to
have the selfview activated during
the meeting.
You may want to zoom, pan or tilt
your camera to provide a better
view for the other participant(s). To
get a better view, you may want to
maximize the selfview.
Why Resize the Selfview?
You may now tap Maximize to
get a full-screen Selfview.
Repeat the process to minimize,
or deactivate the selfview by
tapping the Selfview icon again.
You may also use this to gain
access to controlling your own
camera.
Tap Camera, as outlined. Tap Selfview to turn it on.
To exit this
menu, putting changes into
eect, tap anywhere outside
the active menu.