Cisco TelePresence MX300 G2 - Log Onto a System with Your Own Credentials

6
D1507602 User Guide
Cisco TelePresence MX200 G2, MX300 G2
SX80
Produced: April 2014 for TC 7.1
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.
Video systems located in meeting
rooms and quiet rooms and running
under CUCM (Cisco Unied
Communications Manager) may
allow you to log in to the video
system with your own personal
credentials.
CUCM will then route all incoming
calls destined for you to that specic
video system.
About Hot-desking
Log Onto a System with Your Own Credentials
Introduction to Video Conferencing
Type in your
credentials
and tap Sign In, as outlined.
Tap Sign In, as
outlined.
Select your prole among
those you may choose
between, as outlined.
The system will conrm a
successful sign-in. You will
now receive calls destined
for you.
To sign out tap
Sign-out, as
outlined.
You will be prompted
to conrm your
intentions.