Cisco TelePresence SX20 Quick Set - What’s new in CE9

Configuring Direct IP Address Calls
6
Using Web Interface
5
Without a provisioning system, you must configure each video system individually.
To be able to make calls, you must set the IP address, if not provided by the net
-
work, and SIP/H.323 parameters.
In general, we recommend you to use the web interface to administer and maintain
the system. The web interface is the administration portal for the system. You can
connect from a computer and administer the system remotely. It provides full con
-
figuration access and offers tools and mechanisms for maintenance.
The web interface is organized in sub-pages. All sub-pages shown below are
available if the video system is registerd to an on-premise service (CUCM, VCS);
the pages shown in grey color are not available if the video system is registered to
the Cisco cloud service (Cisco Spark).
1
3
2
1
Launch a Web browser
and enter the IP address
into the address bar, then
press [Enter] key.
2
Enter your [user name] and
[passphrase].
The default user name is [ad-
min] with no passphrase set.
3
Click [Sign In].
Main menu
Setup
Conguration
Status
Peripherals
Personalization
Favorites
Call ControlHome Securit y
Users
Access PIN
Server Certicates
CUCM Certicates
Certicate Authorities
Strong Security Mode
Sign In Banner
Non-persistent Mode
Maintenance
Diagnostics
System Logs
Call Logs
User Interface Screenshots
Software Upgrade
Option Keys
Backup and Restore
System Recovery
Restart
Integration
In-Room Control
Startup Scripts
Developer API
1
2
1
Click [Setup].
2
Click [Configuration].
3
3
Click [Conference].
4
5
4
In the [DefaultCall] section,
select [H323] from the
[Protocol] drop down list.
5
Click [Save].
Cisco TelePresence SX20 Quick Set Easy Setup Guide
6
Configuring Direct IP Address Calls