Cisco TelePresence System Profile Series Administrator's Guide

D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
36
Cisco TelePresence System Codec C40/C60 and Profiles using C40/60 Administrator Guide
User administration
You can manage your video conference system’s user
accounts from this page. You can create new users, edit the
details of existing users, and delete users.
The default user account
The system comes with a default administrator user account
with full access rights. The user name is admin and no
password is set.
It is highly recommended to set a password for the
admin user.
Read more about passwords in the ► Setting passwords
chapter.
About user roles
A user account must hold one or a combination of several
user roles.
The following three user roles, with non-overlapping rights,
exist:
• ADMIN: A user holding this role can create new users and
change most settings. The user neither can upload audit
certificates nor change the security audit settings.
• USER: A user holding this role can make calls and search
the phone book. The user can modify a few settings,
e.g. adjusting the audio volume and changing the menu
language.
• AUDIT: A user holding this role can change the security
audit configurations and upload audit certificates.
An administrator user account with full access rights,
like the default admin user, must possess all the three
roles.
Default user account
The system comes with
admin as the default user
account. This user has
full access rights.
Navigate to: Configuration > User Administration
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Web interface

Cisco TelePresence System Profile Series Specifications

General

Brand	Cisco
Model	TelePresence System Profile Series
Category	Conference System
Language	English