Cisco TelePresence System Profile Series User Manual

www.cisco.com
18
Cisco TelePresence System Prole-series, C-series codecs, Quick Set C20 User guide
D14852.03 User guide Cisco TelePresence Prole, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
Activated NTP serverDeactivated NTP server
Setting date and time yourself
You may specify date and time zone settings along with date and time format and the
date and time of day itself.
Do as follows:
1. Start from the Home menu and navigate down to Settings and press the
key.
Then navigate to Date and time and press the
key.
2. Use Arrow keys and the
key to set everything as required.
Setting date and time automatically
You may have the date and time of day set automatically. If you set NTP server to
Auto, the system will take care of the connection to the NTP server itself.
If you set it to Manual, you must specify the path to the NTP server.
At any rate, you must still specify time and date formats as well as the time zone.
The options shown here are
available when NTP server O has
been chosen only.
CALL SETTINGS
NTP server: Off
NTP server: 2.ntp.somewhere.cu.no
Day: 10
Month: September
Year: 2010
Time: 13:37
Date format: Day, Month, Year
Time format: 24 hours
Year.Month.Day (yyyy.mm.dd)
Month.Day.Year (mm.dd.yyyy)
Day.Month.Year (dd.mm.yyyy)
Year.Month.Day (yyyy.mm.dd)
Month.Day.Year (mm.dd.yyyy)
Day.Month.Year (dd.mm.yyyy)
10
February
2010
13:37
24 hours
12 hours (am/pm)
24 hours
12 hours (am/pm)
TIME ZONES
GMT-12:00
GMT-11:00
GMT-10:00
GMT-09:00
GMT-08:00
GMT-07:00
GMT-07:00
GMT-07:00
GMT-06:00
GMT-06:00
GMT-06:00
Inter national Date L ine West
Midwa y Island, Sam oa
Hawaii
Alaska
Pacif ic time
Arizona
Mountain Time
Chihuahua, La Paz, Mazattan
Central America
Saskatchewan
Guadalajara, Mexico City, Monterrey
Scroll with the
and Arrow keys
to access settings
not shown.
DATE AND TIME
NTP server: Auto
NTP server: 2.ntp.somewhere.cu.no
Time zone: GMT–11:00 (Midway Island
Date format: Day, Month, Year
Time format: 24 hours
DATE AND TIME
NTP server: Manual
NTP server: 2.ntp.somewhere.cu.no
Time zone: GMT–11:00 (Midway Island
Date format: Day, Month, Year
Time format: 24 hours
Save
Cancel
2.ntp.somewhere.cu.no
Setting NTP server to Manual
lets you specify the path to
the NTP server. Otherwise
nothing is dierent from the
Auto setting.
Contents
Advanced settings
Getting started
Making calls
Phone book usage
In-call features
Scheduled meetings
Getting started

Cisco TelePresence System Profile Series Specifications

General

Brand	Cisco
Model	TelePresence System Profile Series
Category	Conference System
Language	English