Cisco UCS C22 M3 High-Density SFF Rack-Mount Server
12
CONFIGURING the SERVER
Approved Configurations
(1) 1-CPU configurations:
■ Select any one CPU listed in Table 3.
(2) 2-CPU Configurations:
■ Select two identical CPUs from any one of the rows of Table 3 on page 11.
Caveats
■ You can select either one CPU or two identical CPUs.
■ If you select one CPU, only one PCIe slot (the full-height slot on riser 1) is available for use.
■ For optimal performance, select DIMMs with the highest clock speed for a given processor
(see
Tab le 3 on page 11). If you select DIMMs whose speeds are lower or higher than that
shown in the tables, suboptimal performance will result.
To Next Page
Loading...
