Cisco UCS C22 M3

Cisco UCS C22 M3 High-Density SFF Rack-Mount Server
CONFIGURING the SERVER
27
Approved Configurations
(1) Choose Up to Two SFP+ Modules for Each Network Card Ordered
■ You may choose one or two SFP+ optical modules cables for each compatible PCIe network
card ordered. You would normally order two modules for connecting to the primary and
redundant network switching equipment. With the SFP+ optical modules, you can use
common fiber optic cables, widely available.
See Figure 5 on page 29 for typical SFP+ and twinax connections to the network cards.
Caveats
Check the table on the following page for compatibility between the PCIe network cards and
SFPs or twinax cables.