Cisco UCS C220 Installation And Service Guide

Contents
v
Cisco UCS C220 Server Installation and Service Guide
OL-25760-01
Replacing a Cisco Flexible Flash Card 3-40
Overview of the Pre-Installed Cisco Flexible Flash Card 3-40
Enabling a Cisco Flexible Flash Virtual Drive 3-41
Booting a Cisco Flexible Flash Virtual Drive 3-41
Monitoring and Managing a Cisco Flexible Flash Card 3-42
Synchronizing RAID After Installing a Second Cisco FlexFlash Drive 3-42
Cisco Flexible Flash Card Replacement Procedure 3-43
Replacing the LSI RAID Battery Backup Unit or SuperCap Power Module 3-45
Installing a Trusted Platform Module 3-47
Enabling the Intel Trusted Execution Technology (TXT) Feature For the TPM 3-48
Replacing a SCU Upgrade ROM Module 3-50
Replacing a Software RAID Key Module 3-51
Replacing Power Supplies 3-52
Wiring a DC Power Supply 3-53
Enabling or Disabling the Internal USB Port 3-55
APPENDIX A Server Specifications A-1
Physical Specifications A-1
Environmental Specifications A-2
Power Specifications A-3
450W AC Power Supply A-3
650W AC Power Supply A-4
930W DC Power Supply A-4
APPENDIX B Power Cord Specifications B-1
Supported Power Cords and Plugs B-1
AC Power Cord Illustrations B-3
APPENDIX C RAID Controller Considerations C-1
Supported RAID Controllers and Required Cables C-2
Mixing Drive Types in RAID Groups C-4
RAID Backup Units C-4
Factory-Default Option ROM Settings C-5
RAID Controller Migration C-6
Embedded MegaRAID Controller C-7
Notes on Supported Embedded MegaRAID Levels C-8
Installing a SCU Upgrade ROM Module For Embedded RAID SAS Support C-9
Installing a Software RAID Key Module for Embedded RAID 5 Support C-10

Cisco UCS C220 Specifications

General

Brand	Cisco
Model	UCS C220
Category	Server
Language	English