Cisco UCS M3 Series User Manual

Name and number the VLAN appropriately, then click OK.3.
Verify that the VLAN has been created.4.
In the LAN tab > LAN Cloud, right-click VLAN Groups and select Create VLAN Group.5.
Name the VLAN Group and select the VLAN that was defined previously.6.
Do not select the Uplink Ports or Port-Channels. Click Finish.Note: If you want to select a
specific uplink port or port-channel, read the VLAN Group documentation in order to avoid
any disruption in service.
7.
Verify that the VLAN Group is present under LAN tab > LAN Cloud > VLAN Groups.8.

Cisco UCS M3 Series Specifications

General

Processor Type	Intel Xeon
Memory	Up to 768 GB
Memory Type	DDR3
Maximum Memory	768 GB
Number of Processors Supported	2
Product Series	UCS M3
Form Factor	Rack
Storage	SAS, SATA, SSD
Network	10 Gigabit Ethernet
Product Type	Server
RAID Levels	0, 1, 5, 6, 10
Storage Options	SAS, SATA, SSD
Network Connectivity	10 Gigabit Ethernet, Fibre Channel