Cisco UCS M3 Series User Manual

Verify that an Inband IP Address has been allocated to the Service Profile from the
Management IP Address drop-down in the General tab.
5.
5. Configure the CIMC
This section outlines the process to assign an Inband IP Address directly to the CIMC of a server
from the previously created Inband Profile.
Navigate to the server you wish to configure with an Inband IP Address.1.
Once there, select the Inventory tab then the CIMC tab.2.
Under Actions, select Change Inband Management IP. A popup window appears.3.
Complete the Network and Management IP Address Policy fields with the previously created
options, and then click OK.
Notice that the IP Address does not change until OK has been clicked.
4.

Cisco UCS M3 Series Specifications

General

Processor Type	Intel Xeon
Memory	Up to 768 GB
Memory Type	DDR3
Maximum Memory	768 GB
Number of Processors Supported	2
Product Series	UCS M3
Form Factor	Rack
Storage	SAS, SATA, SSD
Network	10 Gigabit Ethernet
Product Type	Server
RAID Levels	0, 1, 5, 6, 10
Storage Options	SAS, SATA, SSD
Network Connectivity	10 Gigabit Ethernet, Fibre Channel